Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Center Tunnel on Audi A7

Model: Audi A7 MK 1 - Years 2010-2017
Part: Center console tunnel

In this brief guide, you will find instructions to remove the center tunnel on the Audi A7. First, get inside the cabin and start by removing the rear air vents by disconnecting the electrical connector at the back. Then, unscrew the screws located inside and subsequently remove the rear part of the tunnel. At this point, remove the USB ports and the armrest by unscrewing the screws and disconnecting the various wiring. Remove the plastic cover of the instrument panel and then the entire center tunnel, making any necessary repairs or replacements.

Posted on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A7 (2010-2017 / MK 1) If you own a first-generation Audi A7 and want to manually reset the oil light, follow the steps outlined in this guide. First, enter the cabin and t…
Audi A7 (2018-2025 / MK 2) This tutorial shows how to reset the MMI multimedia system in the Audi A7, a very simple and quick operation to perform in case of malfunction or aft…
Audi A7 (2010-2017 / MK 1) In the Audi RS7, it may happen that the MMI multimedia system freezes or shows various signs of malfunction. In these cases, we can try to solve the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos