Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to disassemble and replace the turbine on Audi A4

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Turbine
Operation: How to disassemble and replace the turbine on Audi A4

Let's see how to disassemble and replace the turbine on Audi A4. We open the bonnet, lift it and put it in safety; we remove the soundproofing panel from the engine, unscrew the locking pins of the turbine (located in the engine compartment). With a socket wrench we remove the valve from the motor housing and disconnect the various power supply terminals with a screwdriver or with a needle nose pliers. After comparing the damaged valve with the new one, mount it on the engine block located in the compartment, tighten it well with the pins and connect the clamps. We test the correct functioning of the car.


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos