Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuses in an Audi TT Fuse Box

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Fuse box

Replace the fuses in the dedicated fuse box of an Audi TT. Open the cover and check the instrument cluster for the reported issue with the car. Use a plastic trim tool to remove the cover on the side of the dashboard, then use needle-nose pliers to disconnect the damaged fuses in the compartment. Once this is done, insert the new fuses into the appropriate slots in the compartment. Finally, close the fuse inspection box with the cover. Test the proper functioning of the vehicle by turning on the instrument cluster with the appropriate key.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Boxes of the Audi TT
Where to Find the Fuse Boxes of the Audi TT
Audi Tt (2006-2014 / MK 2, 8J) The Audi TT has two fuse boxes: one in the cabin, located between the steering column and the driver's door, while the second is in the engine compar…
Fuse Box Diagram for the Audi TT
Fuse Box Diagram for the Audi TT
Audi Tt (1998-2006 / 8N, MK 1) This guide will show you how to locate the internal fuse box of the Audi TT and find the fuse diagram. First, open the front door and start removing …
How to Locate the Fuse Boxes of the Audi TT Mk1
How to Locate the Fuse Boxes of the Audi TT Mk1
Audi Tt (1998-2006 / 8N, MK 1) This guide shows the location of the fuse boxes of the Audi TT Mk1. The fuse box that contains the fuses for the navigation and entertainment systems…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos