Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of front seats Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Seat

Let's see how to remove the front seats of our Audi A4 B8. First of all we bring the front seats all the way forward and we go to remove the plastic supports of the belts with a thin screwdriver: remove the clip to release the belt. Now we remove the plastic cover located under the seat and we go to disconnect the plastic CDI sheath and the connectors (driver presence and that of the belt). Remove the plastic caps of the guides and unscrew the torx screws (four) of the guides. At this point, look for the right position to be able to slide out the seat.

Posted on 17 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front and rear seats of the Audi A4
How to remove the front and rear seats of the Audi A4
Audi A4 (2007-2016 / B8) In this guide, we will see the instructions that will allow us to disassemble and replace the front and rear seats of the Audi A4. First, we open the…
How to remove the front seats of the Audi A4 B5
How to remove the front seats of the Audi A4 B5
Audi A4 (1994-2000 / B5) Let's see in this video how to remove and replace the front seats of the Audi A4 B5, first generation. First we open the front doors and start by uns…
Removal of rear seats Audi A4 B6
Removal of rear seats Audi A4 B6
Audi A4 (2000-2004 / B6) In this video tutorial we will see how to remove the rear seats of an Audi A4 B6. First of all, we open the rear doors and access the back of the car…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos