Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the headlight bulbs on the Audi A6

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Headlight bulb

Are the headlight bulbs burned out? Let's see how they change on Aud A6. We open the front hood, pulling the lever located at the bottom right of the dashboard, let's put it in safety. We remove the cover located behind the headlight. Once the cover has been removed, remove the lamp holders with the metal hooks and the burnt out bulbs. We mount the new bulbs in the headlight. We mount the previously removed cover in the back of the headlight. We test the correct functioning of the lights: we operate the operating knobs of the lights. We close the front hood.

Posted on 21 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Removing the Audi A6 headlight bulbs
Removing the Audi A6 headlight bulbs
Audi A6 (2004-2012 / MK 3, C6) Are the headlight bulbs burned out? Let's see how they disassemble on Audi A6. We open the front hood by pulling the lever located at the bottom righ…
Replacement of Audi A6 headlight bulbs
Replacement of Audi A6 headlight bulbs
Audi A6 (1997-2004 / MK 2, C5) Audi A6 headlight bulbs are damaged and we need to replace them, let's see how to change them. We raise the front hood by pulling the lever located a…
Replacement of the front headlight of the Audi A6
Replacement of the front headlight of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) Today we will discover the guide that will allow us to disassemble and replace the front headlight assembly of the Audi A6. First, we open the engine…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos