Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Side Mirror on Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Side mirror

Want to remove the side mirror on an Audi A4? Remove the mirror if you want to take off the cover. Pry between the perimeter of the mirror frame and the mirror glass. Continue prying until the plastic parts detach from the mirror (disconnect the power cable). Use a screwdriver to remove the screws that disconnect the mirror cover. Replace the damaged part with a new one. Be careful to engage the plastic clips into the mirror supports during reassembly. Connect the rear electrical connector of the mirror.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Side Mirror on Audi A4
Replace Side Mirror on Audi A4
Audi A4 (2007-2016 / B8) Is the exterior mirror on your Audi A4 broken? Want to replace it? Here's how to proceed. Use a plastic lever to detach the mirror. With an appropria…
How to Replace the Outside Mirror on an Audi A4
Audi A4 (2007-2016 / B8) Watch this video to learn how to replace the outside mirror on an Audi A4. Use a plastic trim tool to pry between the edge of the mirror housing and …
How to remove the side trim of the luggage compartment of the Audi A4
How to remove the side trim of the luggage compartment of the Audi A4
Audi A4 (2004-2008 / B7) Below we will see the main instructions that will allow us to disassemble and remove the side lining of the luggage compartment of the Audi A4. In or…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos