Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change headlight bulb on Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Headlight bulb

Change the headlight bulb of an Audi A3? Let's see the dismantling of the bulb. Let's open the front hood and lift it up. We find the headlight cover cap (located in the rear part of the headlight) and remove it. Once here, we will find the bulbs with metal hooks, take out the lamp holders from the lighthouse and go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We turn on and check the operation of the new light bulb. We mount the cover cap and close the hood.

Posted on 18 September 2020 by ScegliAuto

Video tutorial

Related tutorials

How to change the front headlight bulbs on an Audi A3
How to change the front headlight bulbs on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Learn how to change the front headlight bulbs on an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard …
How to replace a bulb in an Audi A3
How to replace a bulb in an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, you can observe how to replace the bulb of a headlight of an Audi A3 car. First, we will need to proceed with the disassembly of th…
Replacement of the front headlight bulb of the Audi A3
Replacement of the front headlight bulb of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Following these brief instructions, we will see how to disassemble and replace the low beam bulb of the front headlight of the Audi A3. First, open t…

Other guides you may be interested in

How to Remove the Oil Filter on a Toyota Yaris

How to remove the oil filter on a Toyota Yaris? This is a simple operation if you follow the correct steps. Lift the car using a column lift or jack. After removing the cover panel (if present), use a socket spanner to unscrew the oil filter holder. Allow the oil to drain into a container for disposal. Remove the dirty and worn filter from the metal container; clean the container and insert a new filter. Screw the filter holder back into its designated housing using the appropriate spanner and lower the car once the job is complete.

Watch the video!


by ScegliAuto

More videos