Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A4
  6. : Disassembly of Audi A4 window lifter push-button panel

Audi A4 - Video tutorial

Model: Audi A4 B7 - Years 2004-2008
Part: Window lift button
Operation: Disassembly of Audi A4 window lifter push-button panel

In this video tutorial we will see how to disassemble the window control panel of an Audi A4. First we go to access the interior of the car to disassemble the door panel: after removing the panel screws and then unhooking it, we go to disconnect the electrical connector of the push-button panel and the cable of the handle. At this point we are going to press on the side plastic tabs until the button panel is completely unhooked and remove it from the door panel. For reassembly, it will be enough to reassemble it and hook it from the sides and then reconnect the electrical connector!


Posted on 26 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos