Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel on an Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Steering wheel

In this video tutorial, you will learn how to remove the steering wheel and airbag from an Audi A3. First, open the engine bonnet and disconnect the two battery terminals; once done, get inside the car and remove the plastic caps found on the sides of the steering wheel: then unscrew the screw located underneath and remove the airbag by disconnecting the electrical connector at the back. At this point, remove the central steering wheel bolt using a socket spanner or a tube spanner; remove the steering wheel!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel of an Audi A3
How to Remove the Steering Wheel of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to disassemble the steering wheel of an Audi A3? Follow these steps for removal. Before removing the airbag from the steering wheel, disconnect t…
How to Remove the Airbag from an Audi A3
How to Remove the Airbag from an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) It is advisable to perform this procedure with the battery disconnected. Before you start, sit in the driver's seat of your Audi A3. Begin by turning…
Guide to Dismantling the Ignition Barrel of the Audi A3
Guide to Dismantling the Ignition Barrel of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today, this guide shows the steps on how to dismantle and replace the ignition barrel of the Audi A3. First, get inside the vehicle and start by remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos