Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on Audi TT

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light bulb

See other generations:
Video tutorial

Open the trunk door and look inside from the side: you will notice that there are two access panels (one on each side) within the frame. Open them using a flathead screwdriver or any pointed tool.

Disconnect the now-exposed connector and remove the two screws located at the top and bottom on the back of the light assembly. At this point, remove the light assembly and place it on a workbench.

Unscrew the two screws at the back and remove the entire housing where the bulbs are mounted. Unscrew the affected bulb and insert the new one.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Change the Front Position Bulbs on the Audi TT?
Audi Tt (2006-2014 / 8J, MK 2) In this video tutorial, you will learn how to remove and replace the front position bulbs on the Audi TT headlight by following these simple steps. F…
Replacing the Rear Headlight Bulbs on an Audi TT
Replacing the Rear Headlight Bulbs on an Audi TT
Audi Tt (1998-2006 / MK 1, 8N) Follow these instructions to remove and replace the rear headlight bulbs on an Audi TT in simple steps. First, open the trunk and start removing the …
Replacement of the headlight bulb of the Audi TT.
Replacement of the headlight bulb of the Audi TT.
Audi Tt (2006-2014 / 8J, MK 2) Let's discover the information that will allow us to disassemble and replace the headlight bulb of the Audi TT. First of all, we open the hood of the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos