Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Headlight Bulbs on Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Do you want to remove the bulbs from the front headlight of an Audi A3? Let’s look at how to remove the bulbs inside the front headlight. Remove the cover located in the front wheel arch to access the back of the headlight.

Once you reach it, detach the cover cap at the back of the headlight. At this point, you will find the bulbs with their holders inside: disconnect the holders from the headlight.

Install the new bulbs, close the back of the headlight with its plastic cover. Finally, close the front headlight with its cover.

Test the operation of the new bulbs.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to change the front headlight bulbs on an Audi A3
How to change the front headlight bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to change the front headlight bulbs on an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard …
Replacing the Rear Light Bulbs on an Audi A3
Replacing the Rear Light Bulbs on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Are the rear light bulbs damaged? Do you want to replace the light? Remove the rear light and replace it. Open the boot and secure it; remove the cov…
Replacing the Bulbs in the Front Headlamp of an Audi A3
Replacing the Bulbs in the Front Headlamp of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replacing the bulbs in the front headlamp of an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos