Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel on Audi A2

Model: Audi A2 MK 1 - Years 1999-2005
Part: Door trim panel

Remove the screw cover located near the opening handle and unscrew the screw below. To do this (remove the plastic screw cover) use a plastic lever or a flat head screwdriver. Unscrew the two screws located under the central handle, as shown in the video. Already done! Already after having unscrewed the aforementioned screws, you can remove the door panel, pulling it a little at a time in all its parts until it is completely disassembled. Perhaps by helping yourself by prying between the panel and the door, again with a lever with a flat screwdriver. Unscrew the various cables and connectors and that's it.

Posted on 25 March 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the power window switch panel of the Audi A2.
How to replace the power window switch panel of the Audi A2.
Audi A2 (1999-2005 / MK 1) Below we will see the steps that will allow us to disassemble and replace the power window switch of the Audi A2, following the instructions below. F…
How do you remove the door panel of the Audi A2?
How do you remove the door panel of the Audi A2?
Audi A2 (1999-2005 / MK 1) In order to remove the door panel of the Audi A2, you need to loosen the screws that hold it to the door: these screws are located under the armrest,…
How to open the trunk hatch locked in the Audi A2?
How to open the trunk hatch locked in the Audi A2?
Audi A2 (1999-2005 / MK 1) In the Audi A2, it may happen that the trunk hatch gets stuck, for example due to a problem with the control button or the lock actuator. In these ca…

How to Remove the Bumper on an Alfa Romeo Mito

In this video, learn how to remove the front bumper on an Alfa Romeo Mito. Lift the engine bonnet and secure it. Use a plastic lever to remove the rivets/screws located at the top of the bumper. Once the rivets at the top are removed, unscrew the rivets of the splash guards and remove the pins located at the bottom of the bumper. Remove the bumper from the vehicle body. To proceed with the reassembly: hold the bumper against the vehicle body and tighten all screws around the splash guard and along its perimeter.

Watch the video!


by ScegliAuto

More videos