Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A4
  6. : Pump replacement on Audi A4

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Fuel pump
Operation: Pump replacement on Audi A4

How to access and disassemble the fuel pump in the tank of the Audi A4. We lift the seat of the car seat and identify the screws that tighten the cover cap. Unscrew the cap tightening screws with a socket wrench, remove it from its seat, unscrew the large plastic nut. Finally we disconnect the power supply terminals and the liquid circulation tubes. We take out the floating fuel pump. We mount the new float fuel pump with all the attached parts. We close the tank with the cover cap. We start the vehicle at the end of assembly and carry out a test.


Posted on 24 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the tank float located in the Audi A4? Read Answer
    • A4 2004-2008 - Where is the fuel pump located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the high pressure fuel pump of the Audi A4 TFSI located? Read Answer
    • A4 2000-2004 - Where is the fuel pump of the 2002 Audi A4 located? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos