Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Instrument Cluster on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Instrument cluster

Want to change the instrument cluster on an Audi A3? Let's see how to remove it from inside the dashboard. Remove the plastic cover beneath the instrument cluster (without breaking the plastic clips) and detach it from the dashboard. Then, use a screwdriver to unscrew the fastening screws of the instrument cluster. After removing the screws, pull the piece out from the dashboard and disconnect the power cable. Install a new piece or reinstall the same one (replace the LEDs/bulbs in the cluster). Refit the screw cover under the instrument cluster. Check the complete functionality of the piece.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulbs in the Front Headlamp of an Audi A3
Replacing the Bulbs in the Front Headlamp of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replacing the bulbs in the front headlamp of an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and …
How do you reset the Service light on the Audi A3?
How do you reset the Service light on the Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) To reset the Service light that appears on the instrument panel of the Audi A3, you need to insert the ignition key into the corresponding slot: in t…
Replacing the Front Headlamp Bulbs on an Audi A3
Replacing the Front Headlamp Bulbs on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replace the damaged bulbs installed in the front headlamp of the A3. Lift the bonnet by pulling the lever located at the bottom right of the dashboar…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos