Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window control panel on Audi A3 Sportback MK2

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Push button

In this video we will see the step by step instructions to remove and replace the window control panel on an Audi A3 Sportback MK2. First we open the front door and start with the disassembly of the door panel; to do this we unscrew the plastic covers and unscrew the fixing screws of the panel, as shown in the video. At this point we disconnect the handle cable and the electric connector of the window control panel; to remove the latter we will then unscrew the two fixing screws, removing it together with the grip handle: then release the tabs to remove the push-button panel and replace it with the new one!

Posted on 9 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel from an Audi A3 Sportback
How to remove the door panel from an Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) How do you remove the door panel from an Audi A3 Sportback? Before starting the disassembly work, disconnect the battery terminals located in the boo…
How to remove the climate control panel on the Audi A3 Sportback
How to remove the climate control panel on the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) In today's video we will understand how to remove the central air conditioning control panel on the Audi A3 Sportback third series, in simple and qui…
How to remove the rear window lifter on the Audi A3 Sportback
How to remove the rear window lifter on the Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) Today we are going to see how to remove the window lifter of our Audi A3 Sportback. Let's start by opening the rear door, with a slotted screwdriver …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos