Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the passenger compartment fan on the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Blower motor

We see in this video the instructions to remove and replace the passenger compartment fan on the Audi A4 B8, in simple steps. First of all we open the glovebox and start by removing the Audi Multimedia control unit, disconnecting the electrical connector on the back; then let's unscrew the screws that we find on the sides and under the glovebox, as shown in the video. Once the glovebox has been removed, let's find the passenger compartment fan, unscrewing the fixing screws and disconnecting the electrical connector to remove it and replace it with the new one!

Posted on 30 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the serpentine belt of the Audi A4 2.5 TDI.
How to replace the serpentine belt of the Audi A4 2.5 TDI.
Audi A4 (2000-2004 / B6) Today we will discover the instructions that will allow us to disassemble and replace the serpentine belt of the Audi A4 2.5 TDI, with a V6 engine. F…
How to remove the fan resistor on Audi A4
How to remove the fan resistor on Audi A4
Audi A4 (2000-2004 / B6) How to remove the fan resistor on Audi A4? Let's see in this video how to do the disassembly. Remove with a lever, the plastic placed under the front…
Audi A4 cooling fan replacement
Audi A4 cooling fan replacement
Audi A4 (2007-2016 / B8) Today we will see, in this short and simple guide, how to disassemble and replace the cooling fan of the Audi A4, following the instructions below. F…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos