Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Reverse Light Bulb on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light bulb

Before starting, open the trunk of your Audi A4. Begin by prying off and moving the inner cover near the reverse light. Next, disconnect the electrical connector of the rear light, then unscrew and remove the screws that secure the bulb holder. After that, pull the bulb holder out of its housing. This will give you access to the burnt-out reverse light bulb. Proceed to remove the bulb, and you will have successfully completed the disassembly. To install the new bulb, follow these steps in reverse, and the replacement will be complete.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2007-2016 / B8) To remove the reverse light bulb on an Audi A4, lift the trunk lid and remove the plastic cover located on the inner left side. Once the cover is rem…
Audi A4 (2000-2004 / B6) To replace the reverse light sensor on an Audi A4, remove the bolts securing the plate shown in the video, located under the vehicle at the front. Th…
Audi A4 (2000-2004 / B6) As seen in the attached video tutorial, on the Audi A4 B6, the reverse light switch is located right in the transmission housing, near the driver’s s…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos