Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the reverse light switch located on the Audi A4 and how to replace it?

Model: Audi A4 B6 - Years 2000-2004
Part: Checks and maintenance

As seen in the attached video tutorial, on the Audi A4 B6, the reverse light switch is located right in the transmission housing, near the driver’s side axle boot. To access it, raise the car on a lift or with a jack. The sensor is easily recognizable by its distinctive shape. To remove it, simply disconnect the connector and unscrew it counterclockwise. This task can be challenging due to limited space; you can make it easier by removing the wheel on the driver’s side first.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Pedal Switch on the Audi A4
Replacing the Brake Pedal Switch on the Audi A4
Audi A4 (2004-2008 / B7) Below are the instructions to remove and replace the rear brake pedal switch on the Audi A4. First, get inside the vehicle on the driver's side and s…
How to Replace a Faulty Rear Headlight Bulb
How to Replace a Faulty Rear Headlight Bulb
Audi A4 (2000-2004 / B6) The video shows how to easily and quickly replace a faulty rear headlight bulb. First, open the trunk and locate the screw that holds the rear headli…
How to Remove the Tail Light Bulbs on an Audi A4
How to Remove the Tail Light Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Is the tail light on your A4 out? Here's how to replace the bulbs. Lift the trunk and secure it. Remove the fabric cover that hides the access to the…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos