|
Do it yourself
| |||
| ||||
|
Replace the Audi door lock if it does not work with the remote control, or even trying with the key; in this case it means that there is a problem with the soldering and the micro switch. The lock consists of several parts: the central locking and other components. To perform a correct job, several components must be disassembled: disassemble the four connections of the central block, the cylinders and the external handle, the glass and the window frame and the internal door lining. Once the internal plastic panel and the locking screws have been removed; you will find a microswitch with interlocking mechanism. This object is held in place by a spring which must be removed carefully. To facilitate the disassembly of the lock you can also contact an authorized workshop whose cost is not high; about Euro 150.
Posted on 11 November 2021 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2012-2019 /
8V, MK 3)
In order to deactivate the passenger airbag of the Audi A3, you need to open the glove compartment located on the side of the front passenger. Once t…
Audi A3
(2003-2013 /
MK 2, 8P)
With a flat screwdriver or a small plastic lever, detach the small plastic around the lock buttons. Unscrew the now uncovered screw with a t20 torx w…
Audi A3
(2003-2013 /
MK 2, 8P)
Replace the battery of the Audi A3 key? Let's see the battery replacement. We take our remote control key and with the help of a screwdriver we pry b…
Other guides you may be interested in
|
How to Remove the Headlight Bulbs on a Toyota Rav4
Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.127
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
