Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the interior passenger compartment bulbs on the Audi A1

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Interior dome light bulb

In today's video tutorial we will see how to remove and replace the interior passenger compartment bulbs on the Audi A1 first series. First of all, let's get on board the car and start by removing and replacing the light that we find inside the glovebox, leveraging the ceiling light; so let's replace the torpedo bulb. At this point we disassemble the ceiling light that we find on the sky of the roof, first removing the plastic cover; then we remove the ceiling light to access the bulb lamp, replacing it with the new one. Later we will see how to replace all the other internal bulbs!

Posted on 23 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of the Audi A1
How to replace the timing belt of the Audi A1
Audi A1 (2018-2025 / GB, MK 2) The timing belt of the Audi A1 must be replaced every 150,000 km or after 5 years of use. To replace the timing belt, we need to open the front hood …
How to Replace the Key Battery of an Audi A1
How to Replace the Key Battery of an Audi A1
Audi A1 (2010-2018 / MK 1, 8X) The procedure for replacing the remote key battery of an Audi A1 is common across many models from the German manufacturer; the battery is located at…
How do you replace the battery in the Audi A1 key?
How do you replace the battery in the Audi A1 key?
Audi A1 (2010-2018 / MK 1, 8X) The battery in the Audi A1 remote key is much easier to replace than the battery in many other car remote controls. In this case, in fact, it is not …

How to Reset the Oil Maintenance Service on a Fiat 500X

In this video, learn how to reset the oil maintenance service on a Fiat 500X. This is a very simple operation. Enter the vehicle and turn on the instrument cluster using the button next to the steering wheel. Press the accelerator pedal three times in quick succession, then release the pedal. Turn off the instrument cluster, then turn it back on and wait for it to illuminate. Finally, check the changes made to the car. Always remember to make adjustments to the onboard computer with the engine off.

Watch the video!


by ScegliAuto

More videos