Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Light Bulb on an Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Tail light bulb

Before you begin, open the trunk. Start by removing the cover on the side of the trunk. Once removed, you will reveal a screw that you need to unscrew. Next, you can detach the light assembly from its housing by releasing the clips that hold it in place, then pull it out. This will allow you to remove the bulb cover. Once the cover is off, remove the bulb by turning it counterclockwise ninety degrees, then pull it out, and you will have removed the burnt-out bulb. To install the new bulb, simply reverse the steps, and you will have successfully completed the replacement.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the third brake light bulb of the Audi A4?
How do you replace the third brake light bulb of the Audi A4?
Audi A4 (2007-2016 / B8) In order to replace the third brake light bulb of the Audi A4, you need to access the interior of the car to locate the internal covering of the thir…
How to Replace the Third Brake Light Bulb on an Audi A4
How to Replace the Third Brake Light Bulb on an Audi A4
Audi A4 (2007-2016 / B8) To replace the third brake light bulb on an Audi A4, access the interior of the rear window. Use a thin object to pry off the cover. Once this cover …
How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos