Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Key

Do you need to replace the key battery of your Audi Q3 and don't know how? I'm here to help. Get a replacement battery, which is typically a CR 2032 type for this car model and can be purchased at any retail store. Place the key in the operating position and separate the shell using a flat screwdriver or a plastic lever. Now use the screwdriver to pry out the battery and replace it with the new one, ensuring the correct polarity. Finally, reattach the separated shell and test the remote's functionality near the car.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery for the Audi Q3?
How to Replace the Remote Battery for the Audi Q3?
Audi Q3 (2011-2018 / 8U) To replace the battery in the Audi Q3 remote, press the button located on the top of the remote and lift the key to free its housing. Use a small scr…
How to Change the Battery in the Key Fob of an Audi Q3
How to Change the Battery in the Key Fob of an Audi Q3
Audi Q3 (2018-2025 / F3) In today's video, we will see how to replace the battery in the key fob for the second generation Audi Q3. This video applies to many other contempor…
How to Replace the Remote Battery in an Audi Q3?
How to Replace the Remote Battery in an Audi Q3?
Audi Q3 (2011-2018 / 8U) To replace the battery in the Audi Q3 remote, press the button located at the top of the device to release the emergency key. Once the key is out of …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos