Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Audi A4 headlight

Model: Audi A4 B9 - Years 2014-2024
Part: Headlight

Open the hood and put on the special support rod. For safety, you can work with the handbrake on, the key removed and the battery disconnected. Unscrew the four screws holding the plastic over the front bumper and remove it. At this point you can access the three screws located behind the light: unscrew them. After unplugging the connector, remove the entire headlight and place it on a workbench. Unscrew the lower plastic cover of the bulb concerned and slightly unscrew the bulb itself, then remove it. Unplug the cable and insert the new bulb.

Posted on 2 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Remove the headlight of the Audi A4
Remove the headlight of the Audi A4
Audi A4 (2000-2004 / B6) Removing the headlight on the Audi A4. Let's see how the headlight is removed from above the front of the Audi. We open and lift the front hood, unsc…
How to Replace the Front Headlight on an Audi A4
How to Replace the Front Headlight on an Audi A4
Audi A4 (2000-2004 / B6) Open and lift the hood. Now, lift your vehicle and place it on jack stands for easier and safer work. Remove the cover on the right inner corner to a…
Removal of headlights on A4
Removal of headlights on A4
Audi A4 (2007-2016 / B8) Disassembly of the headlights on the Audi A4. Let's see how the headlights are removed from above the front of the Audi. We open and lift the front h…

Other guides you may be interested in

How to Remove the Bonnet on a Smart Fortwo

To open the front bumper of the Smart Fortwo for bulb maintenance, follow these steps: open the plastic levers located at the sides of the front grille with your hands. Once the front plastic is free, lift it upwards with your hands, then remove it from the bodywork as shown in the video. After removing the mentioned piece, replace the damaged bulbs. To reassemble, secure the plastic cover at the front of the car and then at the bottom. Finally, close the bonnet release levers with your hands.

Watch the video!


by ScegliAuto

More videos