Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radio in an Audi A2

Model: Audi A2 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Car stereo

Video tutorial

Insert the two special "keys" with rings into the appropriate holes located on the sides of the car radio. Push them in until they stop, and their tips will latch onto the radio's hooks.

At this point, pull both rings simultaneously to extract the radio, guiding it out piece by piece. Next, disconnect the connectors from the radio, connect them to the new unit you purchased, and push it back in until it clicks into place: this is all you need to reinstall the car radio.

If you also want to replace the air vent section, after removing the radio, unscrew the two screws located in the corners behind it.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Where Are the Fuses in the Audi A2?
Where Are the Fuses in the Audi A2?
Audi A2 (1999-2005 / MK 1) Any fuse in the Audi A2 is located within the designated fuse box. This box is situated inside the cabin, specifically to the side of the driver's fo…
Thermostat Replacement on Audi A2
Thermostat Replacement on Audi A2
Audi A2 (1999-2005 / MK 1) Is the thermostat damaged? Replace it on your Audi A2. Remove the bolts from the thermostat hose clamp and (use a socket spanner with the appropriate…
How to Replace the Sun Visor Hook on an Audi A2
How to Replace the Sun Visor Hook on an Audi A2
Audi A2 (1999-2005 / MK 1) Before starting, sit in the front seat of your Audi A2. Begin by prying off and removing the sun visor hook frame using a flathead screwdriver. Next,…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos