Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and assembly of the front headlight of the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Headlight

Let's find out, in this video tutorial, how to remove and replace the front light of the Audi Q3, but also of the Q5. First of all, we open the bonnet and begin to disconnect the electrical connector of the bulbs, which we find behind the light; then we use a torx screwdriver to unscrew all the screws of the headlight, which we find both on the top and at the bottom, as shown in the video. At this point we gently remove the headlight, replacing it, if necessary, with the new one; now we can reassemble everything, following the video tutorial until the end!

Posted on 16 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Audi Q3?
How to replace the front headlight bulb of the Audi Q3?
Audi Q3 (2011-2018 / 8U) Today we will see the steps that will allow us to disassemble and replace the front headlight bulb of the Audi Q3. First, we open the engine hood of …
How to replace the front headlight bulb of the 2015 Audi Q3
How to replace the front headlight bulb of the 2015 Audi Q3
Audi Q3 (2011-2018 / 8U) Today we will explain how to replace the bulb in the front headlight of the 2015 Audi Q3 model. For the bulb replacement, we will purchase a ds3 mode…
How to replace the rear light of an Audi Q3
How to replace the rear light of an Audi Q3
Audi Q3 (2011-2018 / 8U) Before we can begin, we will need to open the trunk lid. We will therefore notice that near the lighthouse, in the internal part of the hatch, there …

How to Replace Front Wiper Blades on Toyota Yaris

In this video, learn how to replace the front windscreen wiper blades on a Toyota Yaris. Take the front wiper blade with your hands, pull (as shown in the video) the movable blade and slide it off the arm on the left. Fit the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), you will hear a click indicating it is secured. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second blade. Test the new blades fitted earlier (activate the controls next to the steering wheel).

Watch the video!


by ScegliAuto

More videos