Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q3
    4. : How to replace the front headlight bulb of the Audi Q3?

Audi Q3 - Video tutorial

Model: Audi Q3 8U - Years 2011-2018
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Audi Q3?

Today we will see the steps that will allow us to disassemble and replace the front headlight bulb of the Audi Q3. First, we open the engine hood of our car and start by removing the bulb protection cap, which we find at the back of the headlight; then we disconnect the electrical connector of the bulb and release the metal clip to remove it, as shown in the video. At this point, we install the new bulb on the headlight assembly (in this case, the original xenon bulb is being replaced) and reassemble everything, following the reverse procedure!


Posted on 12 August 2023 by ScegliAuto



Disassembly and assembly of the front headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Let's find out, in this video tutorial, how to remove and replace the front light of the Audi Q3, but also of the Q5. First of all, we open the bonne
How do I replace the light bulb on the rear bumper of the Audi Q3?
Audi Q3 (2011-2018 / 8U) In order to replace the light bulb on the rear bumper of the Audi Q3, you need to remove the small plastic cover located on the bumper, immediately b
Removing the rear headlight Audi Q3
Audi Q3 (2011-2018 / 8U) In today's video tutorial we will see how to remove the rear light of an Audi Q3, in simple steps. First we open the trunk lid and with something thi

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos