Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlights of the Audi A3 Sportback

Model: Audi A3 Sportback MK 3 - Years 2012-2019
Part: Headlight

Let's see in this guide the steps on how to remove and replace the headlights of the Audi A3 Sportback. First of all we open the bonnet and start by removing our front bumper; to do this we unscrew the screws that we find on the upper and lower part of the bumper, and then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video. At this point we disconnect the electrical connectors of the bulbs and unscrew the screws of the optical group to remove it; we just have to replace it with the new one and reassemble the bumper later!

Posted on 1 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the air vents of the Audi A3 Sportback
Replacement of the air vents of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) We see in this guide the instructions that will allow us to disassemble and replace the air conditioning vents or diffusers of the Audi A3 Sportback.…
How to Remove and Replace the Engine Air Filter on an Audi A3 Sportback
How to Remove and Replace the Engine Air Filter on an Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) How to remove and change the engine air filter on an Audi A3 Sportback? Follow these steps: use a screwdriver to remove the clamps from the air intak…
How do I remove the door panel from the Audi A3 Sportback?
How do I remove the door panel from the Audi A3 Sportback?
Audi A3 Sportback (2003-2013 / MK 2) To be able to remove the door panel of the Audi A3 Sportback you have to go and detach the molding which is located in the upper part of the panel, n…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos