Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3 Sportback
    4. : How do I remove the door panel from the Audi A3 Sportback?

Audi A3 Sportback - Video tutorial

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Door panel
Operation: How do I remove the door panel from the Audi A3 Sportback?

To be able to remove the door panel of the Audi A3 Sportback you have to go and detach the molding which is located in the upper part of the panel, next to the interior handle. Under this molding there will be the panel fixing screws, which must be properly loosened. Once these screws have been unscrewed, it will be possible to loosen those positioned in the lower part of the armrest, completely removing the panel and disconnecting the underlying connectors. In this way it will be possible to insert the new panel, connecting and fixing it appropriately.


Posted on 23 May 2024 by ScegliAuto



How to remove the door panel of an Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) How to remove the door panel of an Audi A3 Sportback? Before starting the disassembly work, let's disconnect the battery terminals in the luggage com
How to remove the rear window lifter on the Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) Today we are going to see how to remove the window lifter of our Audi A3 Sportback. Let's start by opening the rear door, with a slotted screwdriver
How to replace the window control panel on Audi A3 Sportback MK2
Audi A3 Sportback (2003-2013 / MK 2) In this video we will see the step by step instructions to remove and replace the window control panel on an Audi A3 Sportback MK2. First we open the

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos