Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Vents on an Audi TT

Model: Audi Audi Various
Part: Air vents

In this tutorial, you will learn how to remove and replace the air vents on an Audi TT in simple and quick steps. First, get in the vehicle and carefully pry on the sides of the air vent using something thin, ensuring not to damage the dashboard parts, to remove it from its housing; perform the same operation to remove the other vents on the dashboard as shown in the video. At this point, insert the new air vent and secure it properly to the dashboard, following the video to the end!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on Audi vehicles
How to replace the headlight bulb on Audi vehicles
Audi Audi Various Today we will explain how to replace the front headlight bulb on Audi vehicles. This operation can be done independently with simple steps. To perfor…
How to replace the battery of the Audi key
How to replace the battery of the Audi key
Audi Audi Various Replacing the key battery of an Audi vehicle is a very simple and quick operation to perform independently, also thanks to our short video tutorial. …
How to replace the battery of the Audi vehicles' remote control
How to replace the battery of the Audi vehicles' remote control
Audi Audi Various Audi A series vehicles use the same remote control to open and close the vehicle; this allows us, in case the battery is low, to perform the same ste…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos