Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag in the Audi A7?

Model: Audi A7 MK 1 - Years 2010-2017
Part: Airbag

In this tutorial we can see how to remove the steering wheel airbag in the Audi A7. Before proceeding it is important to disconnect the negative pole of the battery, as its accidental activation can be very dangerous. Once this is done, we rotate the steering wheel 90 degrees in any direction, after which, with a flat-tipped screwdriver, we press the metal clip on the back of the steering wheel. Once that side is unhooked, we rotate the steering wheel in the opposite direction and unhook the other clip as well. At this point we can extract the airbag and disconnect the rear power connector.

Posted on 7 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the external rearview mirror of the Audi A7
Guide to replacing the external rearview mirror of the Audi A7
Audi A7 (2010-2017 / MK 1) In a few simple steps, we will see how to disassemble and replace the external rearview mirror of the Audi A7. First of all, we open the front door o…
How do you remove the seat belts on the Audi A7?
How do you remove the seat belts on the Audi A7?
Audi A7 (2018-2025 / MK 2) To be able to replace the seat belts on the Audi A7, you need to detach the door pillar covers by simply releasing their fastening clips. In this way…
Where is the fuse box located in the cabin of the Audi A7?
Where is the fuse box located in the cabin of the Audi A7?
Audi A7 (2018-2025 / MK 2) If you want to quickly find the box containing the fuses of the passenger compartment of your Audi A7 second series, you must pay attention to the fo…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos