Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 To replace the battery of an AUDI A3 remote control, it is necessary to obtain a Duracell model 2032 battery. Now proceed to extract the emergency key to have visibility on the hole covered by it, then insert a screwdriver inside to release the shell of the key. Lift the shell to gain access to the battery, then pull it out. It will be advisable to remove any dust accumulated inside the remote control, an excellent method is to use a wd-40 spray and a detergent, then dry with a microfibre cloth. Then insert the new battery in the space provided and close the remote control.
Posted on 12 June 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |