Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on an Audi A6

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on this car model, follow the instructions and steps outlined below, and you can also refer to video images for assistance. Once you open the hood, remove the screws from the air duct and then take out the screws securing the engine cover.

The serpentine belt is located just behind the engine cooling fan, so loosen the tensioner, and you can simply pull out the belt and proceed with its replacement.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on an Audi A6
How to Replace the Serpentine Belt on an Audi A6
Audi A6 (2004-2012 / C6, MK 3) Before starting, open the hood of your Audi A6. Begin by loosening the tensioner that keeps the serpentine belt tight, using a wrench. This will free…
Replacement of the serpentine belt of the Audi A6 3.2 V6
Replacement of the serpentine belt of the Audi A6 3.2 V6
Audi A6 (2004-2012 / C6, MK 3) This brief guide will show us how to disassemble and replace the serpentine or service belt of the Audi A6 3.2 V6, in simple steps. First, we open th…
How to Replace the Serpentine Belt on an Audi A6
How to Replace the Serpentine Belt on an Audi A6
Audi A6 (2004-2012 / C6, MK 3) Before you begin, open the hood of your Audi A6. Start by unclipping and removing the upper engine cover by simply pulling it upward. This will give …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos