Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on an Audi Q5

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

To change the battery in the Audi Q5 key remote, press the button located on the chrome part of the remote and pull out the key, then press the same button again to remove the battery with its housing; take the new battery (battery code CR 2032) and remove it from the packaging.

Now take the battery from its housing and pry it upward to remove it, then insert the new battery.

Take the battery with its housing and insert it into the remote, making sure the button to remove it is facing the side without the buttons for locking, unlocking the car, and opening the trunk until you hear a click; now you can reinsert the key into the remote and test the new battery.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Audi Q5 remote control.
How to replace the battery of the Audi Q5 remote control.
Audi Q5 (2008-2017 / MK 1, 8R) The following video tutorial shows us the steps to replace the battery of the remote control of the Audi Q5 car. To replace the key battery, we need …
Replacing the Key Fob Battery for the Audi Q5
Replacing the Key Fob Battery for the Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In this short and simple video, learn how to disassemble and replace the battery in the key fob for the Audi Q5, as well as the Q3 and Q7. First, tak…
How to Replace the Key Fob Battery for the Audi Q5?
How to Replace the Key Fob Battery for the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) To replace the key fob battery for the Audi Q5, use an object to pry at the side of the device to remove the plastic cover at the back of the fob. In…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos