Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the headlights in the Audi A2?

Model: Audi A2 MK 1 - Years 1999-2005
Part: Headlight

In this tutorial we can see how to disassemble the headlights in the Audi A2, a very simple operation. To do this, we will only need a Torx T30 key. First of all, make sure that the key is not inserted, in order to operate in safety, then open the bonnet and unscrew the three fastening screws of the light, one located on the front side, one on the upper side and the last one on the rear. Once this is done, grab the lighthouse, pull it towards us and extract it from the bodywork. Finally, we disconnect the power connector and proceed with the replacement of the damaged element.

Posted on 24 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to dismantle the front bumper in the Audi A2?
How to dismantle the front bumper in the Audi A2?
Audi A2 (1999-2005 / MK 1) Disassembling the front bumper in the Audi A2 is a very simple operation, let's see how to proceed in this tutorial. First of all, let's remove the e…
Where are the fuses of the Audi A2 located?
Where are the fuses of the Audi A2 located?
Audi A2 (1999-2005 / MK 1) Any fuse of the Audi A2 is located inside the appropriate fuse box. The fuse box is located inside the passenger compartment, more precisely beside t…
How to replace the power window switch panel of the Audi A2.
How to replace the power window switch panel of the Audi A2.
Audi A2 (1999-2005 / MK 1) Below we will see the steps that will allow us to disassemble and replace the power window switch of the Audi A2, following the instructions below. F…

Other guides you may be interested in

How to Clean the Injectors on BMW 3 Series

Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors. Connect the pressure gauge and the cleaning kit to the fuel lines; start running the cleaning fluid from the previously connected kit through the fuel lines of the injectors (repeat this process several times). Disconnect everything and start the engine. Reinstall the fuel line leading to the injectors after cleaning them of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos