Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to remove the front bumper of the Audi A3 MK1

Audi A3 - Video tutorial

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Front bumper
Operation: How to remove the front bumper of the Audi A3 MK1

We see in this guide the main steps that will allow us to remove and replace the front bumper of the Audi A3 first series. First we open the engine hood and start unscrewing all the screws that we find on the top, removing the plastic clips; then we go to unscrew the screws that we find on both sides of the wheel arches, using a torx screwdriver, as shown in the video. At this point we remove the side lights of the arrows and disconnect the electrical connector of the bulb; unscrew the screws below to unhook and remove the bumper!


Posted on 17 August 2022 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos