Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Disassembly of the front bumper of the Audi A3.

Audi A3 - Video tutorial

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Front bumper
Operation: Disassembly of the front bumper of the Audi A3.

Today's guide will show us the useful steps to disassemble and replace the front bumper of the Audi A3. First, we open the engine hood and start unscrewing the plastic screws that we find on the top and bottom of the bumper; then we remove the screws and clips located on both sides of the front wheel arches, as shown in the video. At this point, we release the bumper on the sides until we completely remove it; then we disconnect the tubing of the windshield washer fluid tank located on the back, applying the reverse process for the reassembly of the bumper!


Posted on 22 October 2023 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos