Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 2, 8P
- Years 2003-2013 In this video tutorial we will see how to manually make the convergence of the Audi A3 8P; this procedure applies, in principle, to all types of cars. First of all, let's place our car with perfectly straight wheels; then we build a parallel wire next to the wheels of our car, as shown in the video. At this point we are going to check the distance of the rear wheels and the front wheels from the wire; now we make the various adjustments based on the measurements shown (it is essential to know the original values). We carry out the adjustment of the steering arm until the correct result is obtained.
Posted on 21 August 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |