Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulb

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light bulb

To replace the rear headlight bulb, you need to remove the headlight itself: open the trunk, also open the side carpet cover, unscrew the plastic retaining nut of the headlight, and pull it out of its housing; unscrew the retaining screws of the bulb holder and replace the bulbs (bayonet fitting); check the proper functioning of the new bulbs and proceed in reverse for installation, first securing the bulb holder to the headlight, then repositioning it in its housing and fastening it with the previously removed plastic nut.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Audi A4
How to replace the headlight bulb of the Audi A4
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb of an Audi A4 model b7, we need to: - open the trunk; - unscrew the screw located on the inside, towards the headl…
How to replace the reverse light bulb on an Audi A4
How to replace the reverse light bulb on an Audi A4
Audi A4 (2007-2016 / B8) Before starting, we will have to open the tailgate of our Audi A4. So let's start by disengaging and moving the internal cover placed near the revers…
Replacing Rear Headlight Bulb
Replacing Rear Headlight Bulb
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb, you need to remove the headlight assembly: open the trunk and locate the circular carpeted cover next to the ligh…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos