Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on Audi TT

Model: Audi Tt MK 2, 8J - Years 2006-2014
Part: Warning light – error code

In this video tutorial, you will see how to reset the maintenance light on an Audi TT by following a few simple steps that will guide you toward proper vehicle management. If the service light (with the wrench icon) is on, first change the engine oil and filters. Next, get in your vehicle and insert the key, turn on the ignition, and the screen will display SERVICE EXPIRED; pull the button located on the dashboard, to the right of the display (the display will show: (oil change overdue since. ). Hold the button to the right of the display for 5 seconds, and the display will show: (SERVICE IN.); continue to hold this button until the reset is complete.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the window regulator motor of the Audi TT.
How to reset the window regulator motor of the Audi TT.
Audi Tt (1998-2006 / 8N, MK 1) Below we will see the instructions that will allow us to reset and calibrate the window lift motor of the Audi TT. First, let's get inside the vehicl…
How to reset the TPMS light on the Audi TT
How to reset the TPMS light on the Audi TT
Audi Tt (2014-2023 / MK 3, 8S) The tire pressure reset on Audi TT vehicles is a simple and quick operation to perform in just a few minutes. We remind you that before performing th…
How to reset the TPMS light on the Audi TT
How to reset the TPMS light on the Audi TT
Audi Tt (2014-2023 / MK 3, 8S) The TPMS reset of the Audi TT is an operation that follows the following steps: -The first step is to turn on the instrument panel; -The second step …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos