Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Audi A4 B6 - Years 2000-2004
Part: Cabin air filter

The cabin air filter is located in the engine compartment, just below the windshield on the passenger side; open the hood and remove the seal along the rear edge, take off the plastic cover under the windshield, and access the cabin air filter housing; then remove the cover and pull out the old filter, ensuring there are no dirt residues inside the filter box, and insert the new one following the airflow direction; reassemble the cover, the plastic panel, and the seal. When replacing the cabin air filter, it is also recommended to sanitize the cabin with a suitable antibacterial spray.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
Audi A4 (2000-2004 / B6) The cabin air filter is located in the engine compartment, just below the windshield, on the passenger side, near the battery compartment; to access …
Replacing Cabin Air Filter on Audi A4 B8
Replacing Cabin Air Filter on Audi A4 B8
Audi A4 (2007-2016 / B8) In this video, you will learn how to replace the cabin air filter on the Audi A4 B8. Start by positioning yourself on the passenger side and remove t…
Replace Cabin Air Filter on Audi A4
Replace Cabin Air Filter on Audi A4
Audi A4 (2007-2016 / B8) Need to replace the cabin air filter on an Audi A4? This operation is very easy, let’s see how to do it. Use a plastic pry tool to detach the cover l…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos