Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the air vents of the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Air vents

In this guide we will see how to disassemble and replace the air vents of the Audi A6, also in the Allroad version. First of all, we get on board the car and begin to disassemble and remove the central cover of the dashboard, gently levering on the sides; then we use something thin to release the tabs located inside the air diffuser, as shown in the video. Now we remove the air vent, disconnecting the electrical connector on the back; then install the new one, applying the reverse procedure!

Posted on 30 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear air vents on an Audi A6
How to remove the rear air vents on an Audi A6
Audi A6 (2011-2018 / C7, MK 4) Before we can begin, we will have to go and sit in the driver's seat of our Audi A6. Let's start by inserting two thin but strong tools inside the ga…
How to remove the air vents
How to remove the air vents
Audi A6 (2004-2012 / MK 3, C6) Let's see how to remove the air vents (central dashboard) of an Audi A6. We use multiple levers (screwdrivers) to remove the vents. We leverage the u…
Removing the air vents on the Audi A6
Removing the air vents on the Audi A6
Audi A6 (1997-2004 / MK 2, C5) As shown in the video, the air vents are fixed by two lower interlocking clips (one for each vent) and two upper ones (again one per head). To disass…

Other guides you may be interested in

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos