Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3 Sportback
    4. : Where are the fuses on the Audi A3

Audi A3 Sportback - Video tutorial

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Fuse box
Operation: Where are the fuses on the Audi A3

The fuse boxes in the Audi A3 are located one in the passenger compartment and one in the engine compartment; the fuse box in the passenger compartment, is located where the driver's door swings, we remove the panel with the help of a flathead screwdriver and find the internal fuse box; the second fuse box is located in the engine compartment, between the mudguard and the battery, we release the tabs on the box cover, remove it and access the external fuse box. To replace a fuse, we identify it, grab it with small pliers, extract it, check if the fuse has a broken jumper inside, it needs to be changed, otherwise if the jumper is intact, the fuse is working; we replace a fuse with one of the same amperage.


Posted on 25 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos