Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the driver's seat of the Audi A5?

Model: Audi A5 8W6 - Years 2018-2025
Part: Seat

The pins that hold the driver's seat in place are located underneath it, so first we need to pull the lever and push the seat all the way back. We remove the first two, possibly using a screwdriver drill, then we move the seat completely forward and we move behind it to also remove the two rear pins. We release the seat belt using a flat screwdriver to release the locking mechanism then move the seat back again, disconnect the electrical plugs and finally extract it.

Posted on 25 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the driver's door panel in the Audi A5?
How to disassemble the driver's door panel in the Audi A5?
Audi A5 (2018-2025 / 8W6) In this tutorial, we can see how to disassemble the driver's door panel in the Audi A5, an extremely simple and fast operation. First of all, we open…
Remove headrest on Audi A3
Remove headrest on Audi A3
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Do we want to remove the front seat headrest? Let's see how the Audi A5 headrest is removed. We open the door and enter the rear part of the car so t…
Replacing the Fuel Pump on the Audi A5
Replacing the Fuel Pump on the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) This guide provides the main instructions for removing and replacing the fuel pump on the Audi A5. The low-pressure fuel pump is located under the re…

How to Replace the Cabin Air Filter of a Fiat Punto 55

Replacing the cabin air filter on the first series Fiat Punto 188 requires some patience as several components must be removed before accessing the filter location. The filter is located in the engine bay, on the passenger side, just below the windscreen. To replace it, you will need to remove the plastic grille covering the area just below the windscreen, which also involves removing the wiper control arms. Once you reach the filter location, remove the cover and extract the filter along with its plastic support frame. After thoroughly cleaning all components, fit the new filter and reassemble in reverse order.

Watch the video!


by ScegliAuto

More videos