Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Shark Fin Antenna

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Antenna

This brief video guide shows how to install a shark fin antenna on your vehicle. We use an Audi A1 as an example, but this procedure is applicable to any car. First, remove the old antenna from the vehicle. Clean and degrease the area around the roof. Next, attach the fin to the base of the antenna using the supplied cable. Finally, remove the adhesive film and press the fin firmly onto the bodywork.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on the Audi A1
How to Manually Set the Time on the Audi A1
Audi A1 (2018-2025 / MK 2, GB) To manually change the time on your Audi A1, just a few simple steps are needed. Carefully follow the instructions below, and you will complete the t…
How to Set the Service Interval on an Audi A1
How to Set the Service Interval on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) How to set the service interval on an Audi A1? This operation is very simple; enter the vehicle, turn on the ignition with the appropriate key, press…
How to install and activate automatic and fully full-LED low beams and high beams in an Audi A1.
How to install and activate automatic and fully full-LED low beams and high beams in an Audi A1.
Audi A1 (2018-2025 / MK 2, GB) If you have come up with the brilliant idea of installing and activating automatic full-LED low beams and high beams, know that there are some steps …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos