Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Sistem Digital Tuning Module on an Audi A1

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

The Digital Tuning additional system allows the vehicle to increase torque and power, while reducing fuel consumption. For a personalised quote for your car, visit digitaltuning.ch, but let's see in the video how to install the module: first, remove the engine cover, then locate the rail and disconnect the three-wire sensor, connect the wiring in series to the system, insert the female connector of the module into the rail pressure sensor, insert the male connector into the female connector of the car's system, secure the wiring with cable ties, and mount the additional module away from heat and water sources.

Disconnect the circuit protection bypass from the module wiring and insert it into the module. Connect the bypass to the module with a Velcro strap to avoid losing it. Now you can adjust the additional module, set it to 6.5, with the CRB 02 wiring.

You can reattach the engine cover.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Permanently Disable the Start and Stop System on the Audi A1
How to Permanently Disable the Start and Stop System on the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) The Start and Stop system can be disabled on Audi A1 vehicles by pressing the appropriate button located on the central dashboard near the onboard co…
Fitting an Additional Chip Tuning Control Unit
Fitting an Additional Chip Tuning Control Unit
Audi A1 (2010-2018 / 8X, MK 1) For this operation, you need to obtain the control unit kit for your vehicle model. Locate the installed control unit and the corresponding power con…
How to Install a Dashcam on an Audi A1
How to Install a Dashcam on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) To install a dashcam on an Audi A1, choose the installation point behind the rearview mirror, at the top of the windscreen. Clean the glass with alco…

    Frequently Asked Questions

    • Audi A1 2010-2018 - How much does it cost to maintain an Audi A1? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos