Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting an Additional Chip Tuning Control Unit

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

See other generations:
Video tutorial

For this operation, you need to obtain the control unit kit for your vehicle model. Locate the installed control unit and the corresponding power connectors.

Remove the connector from the installed control unit and, after connecting the new additional accessory to the supplied cable, connect one end of this cable to the vehicle's control unit connector and the other end to the connector that went to the installed control unit.

Essentially, the kit is inserted in series with the cable that powers the vehicle's control unit.

Position the new control unit in a suitable location and secure it with plastic ties. The kit requires power, so connect the negative wire with a terminal to a chassis bolt and the positive wire to a switched fuse.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Install the Sistem Digital Tuning Module on an Audi A1
How to Install the Sistem Digital Tuning Module on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) The Digital Tuning additional system allows the vehicle to increase torque and power, while reducing fuel consumption. For a personalised quote for y…
How to Reset the Service Light on Audi A1
How to Reset the Service Light on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In today's tutorial, you will learn how to reset the service light for routine maintenance on an Audi A1. First, get inside the vehicle and reset the…
Where is the OBD Port on the Audi A1?
Where is the OBD Port on the Audi A1?
Audi A1 (2018-2025 / MK 2, GB) If you have a second-generation Audi A1 (2018-2023) and want to find out where the OBD port is to connect a diagnostic tool, follow these steps. Firs…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos