Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Windshield Wiper Blades on Audi A4

Model: Audi A4 B9 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the windshield wiper blades on an Audi A4. The first step is to purchase new wiper blades to replace the worn ones. Next, get inside your vehicle, engage the parking brake, turn on the ignition, and press the "CAR" button on the central dashboard.

At this point, you will access the settings MENU. Scroll to find the "Wipers" option, select the WIPERS option by pressing the knob button. Now a message saying "Service Position" will appear; you need to confirm by pressing "ON". At this point, the wipers will move to the halfway position, allowing you to replace them or perform necessary checks.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Replacement of the front windshield wipers of the Audi A4
Replacement of the front windshield wipers of the Audi A4
Audi A4 (2000-2004 / B6) Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Audi A4, in simple and quick steps. First of…
How to Replace the Windshield Wipers on an Audi A4
How to Replace the Windshield Wipers on an Audi A4
Audi A4 (2000-2004 / B6) To replace the windshield wipers on an Audi A4, lift the wiper arms off the windshield to the service position. Rotate the blade to access the fasten…
Where is the windshield wiper relay located in the Audi A4?
Where is the windshield wiper relay located in the Audi A4?
Audi A4 (1994-2000 / B5) If the windshield wipers on your Audi A4 have suddenly stopped working, first check the status of the respective relay, whose location is shown in th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos