Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A4?

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

As we can see in this tutorial, resetting the service light on an Audi A4 is an extremely simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key but leave it in the initial position. Next, press and hold the button depicting a wrench, simultaneously turn on the ignition, and then press the "0.0" button. To verify that the reset was successful, you can restart the vehicle.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Audi A4?
How to reset the service in the Audi A4?
Audi A4 (2007-2016 / B8) Resetting the service in the Audi A4, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have comp…
How to Reset the Service Light on an Audi A4?
How to Reset the Service Light on an Audi A4?
Audi A4 (2007-2016 / B8) .. In this tutorial, you will see how to reset the service light on an Audi A4 B8. This operation is extremely simple and quick, and should.. …
How to Reset the Service Light in Audi A4?
How to Reset the Service Light in Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial, you will see how to reset the service light in the Audi A4, a very simple and quick operation to perform only after completing all …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos