Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
8P, MK 2
- Years 2003-2013 Below we will see the steps that will allow us to disassemble and replace the front fog lights of the Audi A3. First, let's move to the front of the car and start prying on the side of the plastic grille to remove it; then unscrew the fixing screws that we find on the sides of the fog light, disconnecting the electrical connector to remove it, as shown in the video. At this point, we remove and replace the bulb with the new one, having the same attachment; finally, we reassemble the fog light, applying the reverse procedure!
Posted on 5 April 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |