Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog lights of an Audi A3 8p

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Fog lights

In this video we can see how to replace a fog light on an Audi A3 8P: the youtuber shows us how he did the operation, after replacing the part. In practice, using plastic spatulas, he leveraged from below, first removing the support and finishing grille of the headlight, which is fixed with clips. Once the grille is removed, we can remove the four screws that hold the headlight in place. There are various types of grilles: for example, the one that can be found on autostore24.com with the code 8051738090735 for the price of 14.60 euros + 7.90 euros for shipping, to which we can also add the fog light with code 8051738085038 for the price of 24.80 euros.

Posted on 22 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fog Light Bulbs on an Audi A3
Removing the Fog Light Bulbs on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Is the fog light on your car not functioning? Let's look at removing the bulb from the fog light on an A3. Release and open the plastic cover located…
Replace the Front Fog Lights on the Audi A3
Replace the Front Fog Lights on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Follow these steps to remove and replace the front fog lights on the Audi A3. First, move to the front of the vehicle and pry the side of the plastic…
How to Remove the Fog Lights of the Audi A3 8P
How to Remove the Fog Lights of the Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this video, we will see how the low position of the fog light of the Audi A3 exposes it to impacts. If the light breaks due to contact, here’s how…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos